AZ 2000 ampere hour Counter

303,00 EUR
(excl. 19% tax)
 
Print product data sheet
Product no.: 2120.0000
Shipping: ca. 3-4 days ca. 3-4 days
Tell a friend
AZ 2000 ampere hour Counter

AZ 2000 ampere hour counter
Ah-counter with 6-digit electromechanical Summing counter.   
In closed case for installation or local operation.

Connecter to standard shunt 60mV or equivalent signal outputs from electroplating rectifiers.
Pulse output for external control of programmable dosing pumps. For example Gamma / 4 with Pulse Control
The electromechanical totalizer may be reset with a key.

For input voltages lower than 1 mV and higher then 150mV,
LED indicates the range control (<MB>) that no accurate measurement is obtained.
(Nominal voltage of a standard shunt = 60mV)
For currents up to 12A, the shunt can be built in the device.
      
Specifications:  (changes reserved)

1. mechanical
    Totalizer

2. LED Power
3. LED Range
   
Totalizer          electromechanical 
6 digits
(optional electronic LCD)  
Accuracy    0,1%
Input voltage

for the total current through isolating modules
(Other voltages on request)
60mV (1...150mV)  
 

10V
   
Pulse output for external control of programmable dosing pumps for example
Gamma / 4 with Pulse Control


Opto coupler
10mA Uce<0,7V 
Uce max 35V

Relais output
100V 1A (optional) 
Ratio
Total cycle counter to output pulses
 
1:1

Suitable for connection of the membrane dosing pump Gamma / 4 with pulse control for automatic dispensing of bath additives.
    
Adjustable measuring ranges
Ah-counter ......300 A    (2 decimal points)
..:.3000 A    (1 decimal point)
..10000 A    (0 decimal point)
Amin-counter .......... 6 A    (2 decimal points)
.........60 A    (1 decimal point)
.......400 A    (0 decimal point)
Asec. / Metal weight
             counter
on request
    
Adjustment to the shunt data can be changed by the customer too.
    
Operating voltage   230 V 50/60 Hz    -20% / +10%  
Power consumption 3 VA
Ambient temperature 0...50°C
Case Panel mounting case to
DIN43700 
Material flame retardant Noryl
Front size W x H 96 x 48 mm
Front panel cut W x H 90,5 x 43 mm
Depth
180 mm
Connectors Plug-in terminal
Weight approx. 500g
Climate resistance rel. Humidity =< 75% 
without condensation  
Electrical safety   to EN 61 010
Air and creepage distances for
Overvoltage category II
Pollution degree 2
Class 1
Protection class

with transparent door
to EN 60 529
front side IP44
                  IP54 
Electromagnetic tolerability
to NAMUR recommendation
NE21, EN 50 081 Part 1
EN 50 082 part 2



X Wish list